 |
Labcut 250/350 Manual Cutting Machines2 models with a cutting wheel capacity of either a 250mm/10in or 350mm/14in blade. Vice configuration, infeed & outfeed to suit different applications. More |
 |
Powercut 250/350Similar in design to the Labcut series but with a powered cutting head. The hydro-pneumatic system gives precise control of the cutting head downfeed rate, leading to more reproducible cutting conditions. More |
 |
Infeed/Outfeed Roller TablesUp to 4m/12ft sections. Outfeed can be fitted with an adjustable end stop with digital display of position. More |
 |
3000 series Microfine Automatic Cutting Machines3001 Basic cutting module with precise control of cutting feed rate. Basis of the more advance systems. 3002 Semi-automatic cutting machine In this version the material is pushed manually to an end stop to initiate the cutting cycle. Used for cutting long lengths of bar or tube when an automatic machine is not suitable or when production quantities are low. 3003 Single bar automatic cutting machine- grip feeder systems. |
 |
3600 series Minifine Automatic Cutting MachinesA heavy duty version of the 3000 series with a larger more powerful cutting wheel. Models are 3601, 3602, 3603 as for the smaller cutting machines. More |
 |
5000 series Plate SawPrecision cutting of composite sheet materials. These new materials are used more and more in industry particularly aerospace and automobile eg Kevlar. Determining mechanical properties of composites means that high quality test coupons of composite materials needs to be prepared. The accuracy of the 5000 series cutting machines makes it very suitable for this task. More |
 |
5600 series Slider CuttersTrimming, Cutting & Preparing Composite Sheet Materials for Test Procedures & Production. More |
 |
6000 series Conduit Cutting MachinesAllows the continuous cutting of conduit used for push pull applications in cars and long lengths of flexible hose in the compressed or relaxed state. More |
 |
6500 series Cut & Weld SystemSpecifically designed for cutting stranded wire eg for the inner wire in push pull applications in cars or for security applications. More |
 |
6600 series Power De-reelerFor use with 6000 series or 6500 series continuous cutting machines. Drums up to 200Kg can be mounted. More |
 |
6700 Paper Band Filter UnitMany automatic cutting machines cutting larger diameter bar produces sludge which if left untreated will block the coolant system and contaminate the coolant. The paper band filter unit, as it’s name implies , has a moving band of filter material which traps the sludge and prolongs the coolant life. More |